OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CD3

Hybrid/EV Battery Pack N Deterioration

P2CD3 closes the lettered deterioration series: N is the fourteenth section of a drive battery whose management assesses each section's condition separately. When it sets, section N can no longer hold or release the energy expected of it, even though wiring and sensors may be intact. No manufacturer documents P2CD3 publicly, and no published battery reaches fourteen individually rated groups; Audi's Q5 PHEV stops at group 8 (P2CCD). CARB obliges diagnostics of storage parts such as cells to name the smallest unit that can be swapped; a pack split this finely would reach codes up to here. Distinguish it from P0BBD, which reports a voltage spread between cells, and from the whole-pack code P0A7F. Typical effects are the MIL, reduced electric range and at times limited power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / D3

Possible causes

  • Cells in section N aged beyond the acceptance limit high
  • Earlier replaced neighbour modules leave section N as the weak link medium
  • Battery controller misjudges section N after a reset or update low

Symptoms

  • MIL or hybrid warning
  • Electric range clearly reduced
  • Drive power limited at times

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2CD3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication