OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CD2

Hybrid/EV Battery Pack M Deterioration

P2CD2 flags section M, the thirteenth part of a sectioned high-voltage battery, as degraded in capacity or power. Unlike sections J to L, M has no matching over-temperature code in the available code lists, so the thermal history of this section has to be read from general pack temperature data. No manufacturer publicly documents P2CD2, and no published battery is divided into thirteen individually rated groups; Audi's Q5 PHEV with eight groups is the largest series on record. For cell and sensor faults and for cell balancing, CARB asks for separate codes per smallest replaceable unit; balancing failures are reported under other codes. Drivers notice less electric range and weaker response in electric mode, and the warning lamp comes on.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / D2

Possible causes

  • Section M degraded by age and charge cycles high
  • Long standstill at low charge damaged cells of section M medium
  • Cell balancing of section M no longer working low

Symptoms

  • Hybrid or engine warning lamp on
  • Reduced electric-only range
  • Sluggish response in electric mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2CD2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication