OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CCF

Hybrid/EV Battery Pack J Deterioration

P2CCF belongs to the deterioration series that rates each section of a divided traction battery on its own; J is the tenth section after A (P0A7F), B to F (P0EDD–P0EE1) and G to I (P2CCC–P2CCE). It is not an electrical fault: the controller has decided that the modules of section J have given up more usable capacity or power than allowed. No manufacturer publicly documents P2CCF. The nearest documented case is the Audi Q5 PHEV, whose battery manager reports eight groups and therefore ends at P2CCD. CARB wants faults of individual storage parts such as cells to point at the smallest unit a workshop can renew; a lettered section series follows that logic. Overheating of the same section has its own code, P2D4E. Likely consequences are the MIL, less electric range and possibly reduced drive power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / CF

Possible causes

  • Modules of section J worn beyond the accepted capacity or power limit high
  • Section J repeatedly ran hotter than the rest of the pack medium
  • Health estimate of the battery controller wrong after software or sensor issue low

Symptoms

  • MIL or hybrid system warning on
  • Electric range noticeably shorter
  • Less power available in electric driving

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2CCF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication