P2CCD
Hybrid/EV Battery Pack H Deterioration
P2CCD reports that section H, the eighth subdivision of a traction battery, has aged past the limit its controller accepts. In practice this code only exists on large packs that the battery management splits into at least eight separately judged groups. Audi's Q5 PHEV is such a case and the only published one: there P2CCD00 stands for battery group 8 in control unit 008C, which makes it the last link of a chain beginning with P0A7F00 for group 1. The 2025 Audi bulletins list it as stored either intermittently or statically, with the MIL on and guided fault finding offering no measure, and prescribe swapping the single module concerned; if more than two modules are named, a technical assistance ticket must come first. Expect less electric range and power. Group 7 is P2CCC, section I would be P2CCE.
Possible causes
- Battery module of group 8 worn out high
- Module aged faster due to heat or uneven cooling medium
- Faulty state-of-health judgement by the battery controller low
Symptoms
- MIL on
- Shorter electric range
- Less power in electric mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2CCD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.