OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CCB

Coolant Pump Speed Sensor Circuit High

P2CCB covers the upper end of the coolant pump speed sensor signal: the input stays above its permitted maximum. On sensors with an open-collector output and a pull-up resistor in the controller, an interrupted signal wire or a sensor that has lost its ground leaves the line resting high, so the open case often lands here rather than under P2CCA. A short between the signal wire and a voltage feed has the same effect. No manufacturer documents P2CCB publicly. GM's patent US20160047374A1 shows why the controller needs a valid reading: it judges the pump by comparing measured and target speed. CARB requires range checks for inputs like this. Checking the sensor ground and the signal wire for continuity usually finds the fault. Low levels are P2CCA, a general circuit fault P2CC8.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / CB

Possible causes

  • Open signal wire, input pulled up by the controller high
  • Lost ground connection at the sensor medium
  • Signal wire shorted to a voltage feed medium

Symptoms

  • MIL on
  • Pump speed missing or stuck at an implausible value in live data

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2CCB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication