P2CC9
Coolant Pump Speed Sensor Range/Performance
P2CC9 means the coolant pump speed sensor delivers a clean electrical signal whose value does not make sense. The controller compares it with what the pump should be doing: a belt-driven pump has to follow engine speed in a fixed ratio once engaged, an electric pump should match its commanded speed. A gap can come from the sensor itself (wrong air gap, damaged trigger wheel, drifting electronics) or from a real pump problem such as a slipping belt or clutch. No manufacturer documents P2CC9 publicly. GM's patent US20160047374A1 builds its electric pump diagnosis on exactly this difference between measured and target speed. CARB asks for rationality checks on such inputs. Unlike P2CC8, P2CCA and P2CCB, the wiring is usually fine, so check the pump drive before replacing the sensor.
Possible causes
- Slipping belt or clutch, so the pump turns slower than expected high
- Sensor loose, wrong air gap or damaged trigger wheel medium
- Sensor electronics drifting or dropping pulses medium
Symptoms
- MIL on after repeated detection
- Engine may run warmer than usual or take longer to warm up
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2CC9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.