P2CC6
Generator Inverter Power Supply B Circuit Low
P2CC6 means supply B of the generator inverter is present but below its permitted level. A weak gate driver feed is dangerous for the power stage: transistors that are not driven fully on run in a lossy partial state and heat up quickly, so the inverter typically blocks the generator. No manufacturer documents P2CC6 publicly. Ford's summary for its 2019 power-split hybrids places the related supply A code P0E10 among the generator-side gate signal faults together with P0BCE and P0BCF, which suggests the same home for supply B. Causes range from a failing internal regulator to low 12 V input during start-up or a corroded ground. CARB requires circuit monitoring for hybrid parts. Siblings: P2CC5 (open) and P2CC7 (high).
Possible causes
- Internal regulator of supply B delivering too little voltage medium
- Low 12 V input to the inverter, e.g. weak auxiliary battery medium
- Corroded ground or connector of the inverter low
Symptoms
- Hybrid system warning light and MIL on
- Generator limited or switched off, reduced hybrid performance
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2CC6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.