OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CC5

Generator Inverter Power Supply B Circuit/Open

P2CC5 concerns supply B inside the inverter that drives a hybrid's generator (motor-generator), typically a low-voltage rail feeding the gate drivers of the power transistors. Which supply gets the letter B is defined by the manufacturer; a second inverter channel or second generator would also fit. The code covers a missing supply or an interrupted feed. No manufacturer documents P2CC5 publicly. GM's 2019 hybrid tables show the principle with P0C0B for the drive motor A inverter: the IGBT module flags a bias fault when its supply dips below a threshold, and 0.168 s of failures within a 0.2 s window set a Type A code. CARB requires circuit monitoring of hybrid components. Without gate supply the generator cannot be switched at all. Supply A: P0E0F.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / C5

Possible causes

  • Supply B for the gate drivers failed inside the inverter medium
  • 12 V feed, fuse or connector of the inverter interrupted medium
  • Poor ground connection of the inverter control electronics low

Symptoms

  • Hybrid system warning light and MIL on
  • Generator out of operation, vehicle may not become ready to drive

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2CC5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication