OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CC2

Generator Voltage Sense Circuit B Range/Performance

P2CC2 means the voltage arriving on generator sense circuit B is within electrical limits but does not agree with what the controller expects, such as the battery voltage measured elsewhere, the commanded set point or the reading of sense circuit A. The usual cause is a voltage drop: corroded ring terminals, a loose ground strap or a damaged fusible link make the sensed value lag behind reality. Because the sense lead itself carries no current, any noticeable difference between it and the output terminal points to resistance in one of the paths. No manufacturer documents P2CC2 publicly. CARB only requires charging-system inputs to be monitored when they influence emissions or feed other diagnostics, so the code often stays without MIL. Circuit A's equivalent is P063B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / C2

Possible causes

  • Voltage drop from corroded terminals, loose ground strap or damaged fusible link high
  • Alternator B delivering too little or unstable output medium
  • Battery with high internal resistance distorting the comparison low

Symptoms

  • Charging warning lamp on or flickering
  • Battery not fully charged or charging voltage fluctuating

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2CC2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication