P2CC1
Generator Voltage Sense Circuit B
P2CC1 is the general fault of a second sense line through which the engine controller reads the actual charging voltage. In the charging system, generator means the alternator; a sense input taps the voltage at the rectifier or battery without load current, so wiring losses do not distort it. Remy describes such a Kelvin sense lead on Chrysler alternators, connected straight to the rectifier plate behind a 2.4 kΩ protective resistor; that terminal is labelled B, which is not the circuit letter of this code. A circuit B is presumably needed only where a second alternator or measuring point exists. No manufacturer documents P2CC1 publicly; Deutz, for example, lists only circuit A codes (P063A, P063C, P063D) for its alternator. Range, low and high: P2CC2 to P2CC4.
Possible causes
- Sense wire B, its fuse or connector open or corroded high
- Second alternator or its regulator faulty medium
- Sense input in the engine control module faulty low
Symptoms
- Battery or charging warning lamp on
- Charging voltage regulated to a fixed or unsuitable value
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2CC1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.