OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CBF

PCV Heater B Control Circuit Low

P2CBF is set when the control line of PCV heater B sits at ground potential at a moment the module expects a voltage on it. On the usual low-side layout, with supply fed directly to the heater and the module providing the ground, a short to ground on that line turns heater B on permanently regardless of command. The ventilation stays protected against frost, but the element draws current continuously and may age faster. No manufacturer documents P2CBF publicly; the A-side code P053B is checked by GM's 2016 diesels at coolant below 90 °C with 20 of 40 failing samples, Type C without lamp. A pinched harness against the engine block or a damaged connector is the typical find.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / BF

Possible causes

  • Control wire pinched or chafed to engine ground high
  • Damaged connector at heater B medium
  • Output stage in the engine module shorted internally low

Symptoms

  • Code stored, MIL depending on manufacturer
  • Heater B constantly on, slightly higher electrical load
  • Usually no driveability complaint

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2CBF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication