OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CBC

Fan 3 Overspeed

P2CBC is the counterpart to P2CBB: the third cooling fan turns noticeably faster than the controller expects for the present request. No manufacturer publicly documents this code. The closest published logic is GM's: table 23OBDG07 flags fan 2 overspeed as P2CBA when the reported speed exceeds the estimate by 1400 to 4050 rpm for 20 s, and treats fan 3 the same way under its own code P14D8 with a margin of 1300 to 4800 rpm. GM's 2025 diesel table watches the LIN fan 3 for underspeed and for readings of 4000 rpm or more, but assigns no P2CBC. CARB requires output devices such as fans to be checked for correct response to their commands. A damaged rotor, a fan module running at full power or false speed feedback would explain the fault. Overspeed is rarely a cooling risk but hints at a component that will fail.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / BC

Possible causes

  • Fan 3 blade broken or rotor unbalanced medium
  • Fan 3 electronics ignore the speed command medium
  • Wrong speed value reported by the fan module low

Symptoms

  • Check engine light, depending on the maker
  • Loud or rough fan noise

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2CBC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication