OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CB9

Fan 2 Underspeed

P2CB9 means the second electric cooling fan reports a lower speed than its command calls for, while communication and wiring are judged sound. GM uses it in two ways. In tables 23OBDG07 and 24OBDG07 the fan must stay below a speed-dependent floor of up to 3550 rpm for 20 s once it has been commanded above 7.65 % for more than 5 s. The 2025 diesel table 25OBDG04B models the expected speed of a LIN fan and flags 16 bad samples out of 20 at one per second, for example under 2300 rpm when 2500 rpm is asked for; both are two-trip codes with the lamp. GM's PIE0601 of 2020 lists P2CB9 with P0494, U0632 and U0633 on 2020–2021 full-size trucks and SUVs and asks for a look at fuses and debris in the blades. Fan 1 has P0494, overspeed of fan 2 is P2CBA.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / B9

Possible causes

  • Fan blades slowed by debris, leaves, snow or ice high
  • Fan 2 motor or its integrated electronics worn or faulty medium
  • Blown fuse, weak supply or poor ground at the fan medium
  • Sporadic entry without fault found (GM investigated without a fix) low

Symptoms

  • Check engine light after two trips
  • Coolant temperature rises at idle or when towing
  • Weaker air conditioning at standstill

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2CB9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication