P2CB6
Turbocharger/Supercharger B Boost System Performance
P2CB6 rates the boost control loop of charger B as a whole: the pressure produced by the second turbocharger or supercharger strays too far, upward or downward, from what the engine module requests in steady closed-loop operation. It is the B counterpart of P2263 and only applies to engines with two separately controlled chargers. No manufacturer documents P2CB6 publicly. GM's A version on its 2018 diesels counts 400 failures in 500 samples between 2,250 and 4,500 rpm at a desired boost of 130–300 kPa and names leaks after the compressor or exhaust restrictions as targets, Type A. CARB requires underboost, overboost and slow-response detection. Unlike P02CA/P02CB, which name the direction, this code judges overall control quality.
Possible causes
- Leak in the charge air path of charger B high
- Sticking wastegate or variable vanes of charger B medium
- Restriction in the exhaust upstream or downstream of turbine B low
- Boost pressure sensor B reading inaccurately low
Symptoms
- MIL on
- Uneven or reduced power under load
- Hissing or whistling from the charge air system
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2CB6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.