OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CB5

Charge Air Cooler Coolant Pump B Control Module Overtemperature

P2CB5 is raised by the electronics inside charge air cooler pump B when their temperature exceeds the limit; the pump then throttles back or stops to protect itself. No manufacturer documents P2CB5 publicly. Ford's 2024 gasoline OBD summary lists the same fault type, 98 (system over temperature), for its auxiliary coolant pump B (P2B64), monitored continuously from 11 V. Ford's 2019 hybrid summary shows the principle on the LIN-linked engine coolant pump (P26D2): the pump sends its module temperature and the PCM flags readings above 130 °C. The board is cooled by the liquid passing through, so overheating mostly follows a dry run, air in the pump, a stiff impeller or a hot mounting spot. Check level and bleeding first; air alone often appears as P2CB1.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / B5

Possible causes

  • Pump running dry or partly in air because of low coolant high
  • Stiff impeller making the motor draw more current medium
  • Pump mounted close to hot exhaust or turbo parts low
  • Ageing power stage in the pump electronics low

Symptoms

  • MIL on
  • Pump B slows down or switches off, charge air gets warmer
  • Reduced power in hot weather or on long climbs

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2CB5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication