OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CB4

Charge Air Cooler Coolant Pump B Supply Voltage Circuit

P2CB4 concerns the power feed of charge air cooler pump B rather than its command line: the pump finds its supply missing or outside the window in which it can run. No manufacturer documents P2CB4 publicly. Ford's 2024 gasoline OBD summary contains the same fault type, 1C (supply out of range), for auxiliary coolant pump B (P2B62); it is monitored all the time from 11 V battery voltage and logged after 5 s. Because the pump electronics sit inside the housing, as Bosch describes for its PCE pump, the pump measures its own supply pin and reports the result. A blown fuse, a relay with burnt contacts, a corroded ground, a damp plug or a weak battery are the usual causes; a voltage-drop test with the pump running finds hidden resistance. Without power the pump stops.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / B4

Possible causes

  • Blown fuse or faulty relay in the pump B feed high
  • Corroded or loose ground connection of the pump medium
  • Moisture or corrosion at the supply pins of the connector medium
  • Weak battery or charging fault pulling the voltage down low

Symptoms

  • MIL on
  • Pump B silent, charge air temperature climbs
  • Other supply-related codes may be stored at the same time

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2CB4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication