OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CB3

Charge Air Cooler Coolant Pump B Stuck/Stalled

P2CB3 is reported when charge air cooler pump B receives power and a command but its rotor does not turn. The pump's own electronics usually detect this from current flowing without rotation and pass the result to the engine module. No manufacturer documents P2CB3 publicly. Ford's 2024 gasoline OBD summary uses the same fault type, 71 (actuator stuck), for its auxiliary coolant pump B (P2B63), checked continuously from 11 V over 5 s. Audi bulletin 2080825 shows a typical trigger on pump A (P2BC1): the V188 pump of 2025–2026 A5, S5 and Q5 can stick after the car stood unused for over two months. Seized bearings, debris, frozen coolant or a burnt winding are other causes. A pump that turns, only too slowly, sets P2CB2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / B3

Possible causes

  • Rotor stuck after a long period without use high
  • Debris or deposits jamming the impeller of pump B medium
  • Coolant frozen because of insufficient antifreeze low
  • Burnt winding or failed drive electronics in the pump medium

Symptoms

  • MIL on, often with a reduced-power message
  • No flow in the second branch of the charge air cooling loop

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2CB3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication