OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CB0

Charge Air Cooler Coolant Pump B Performance

P2CB0 flags that charge air cooler pump B is electrically in order but does not work the way its operating data say it should. No manufacturer documents the code publicly. GM shows how the same check runs on pump A (P026E) in its 2025 diesel table 25OBDG04B: the motor phase current expected for the measured pump speed is compared with the actual current, and an error above 5 A for more than 5 s, with the pump above 1,000 rpm and coolant between 10 and 126 °C, sets the code after 16 failures in 20 samples – Type A, MIL on the first trip. Bosch describes such pumps as brushless units whose own circuit board handles motor control and diagnosis. Worn bearings, a damaged impeller, a restricted loop or low coolant are typical. Pure over- or underspeed has its own codes, P2CB1 and P2CB2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / B0

Possible causes

  • Low coolant level or air pockets in the charge air cooler loop high
  • Worn bearing or damaged impeller in pump B medium
  • Kinked hose, clogged cooler or debris restricting flow medium

Symptoms

  • MIL on
  • Charge air temperature higher than normal, power reduced
  • Unusual whining or rattling from the pump

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2CB0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication