OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2CA5

DC/DC Converter Temperature Sensor E Circuit

P2CA5 is the general circuit fault of the fifth temperature sensor in a DC/DC converter, the one carrying letter E. Converters measure several hot spots because each part heats differently: a Hyundai patent for a hybrid high-side converter places separate sensors on the inductor and on both IGBT switches, high side and low side, and changes the switching frequency when their readings drift apart. No manufacturer documents P2CA5 publicly; the highest letter found in a bulletin is sensor D on the 2021 Ram 1500 eTorque (FCA 08-037-21). The code fits a signal that is unusable but cannot be classed as low, high or implausible. CARB requires circuit checks for such hybrid inputs. Expect the converter to be derated, which can strain the 12 V battery.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / A5

Possible causes

  • Loose, corroded or pushed-out terminal at the converter connector high
  • Temperature sensor E inside the converter failed medium
  • Evaluation circuit of the converter control board faulty low

Symptoms

  • Hybrid or electrical system warning and MIL on
  • DC/DC converter output limited, 12 V battery discharges

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2CA5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication