P2CA2
Charge Air Cooler Coolant Pump Sense Circuit Low
P2CA2 is set when the return wire from the intercooler pump sits below its valid range for longer than allowed. Insulation worn through against the body, water in the plug, or pump electronics that keep pulling the line down are the usual suspects. The last case is tricky: pumps working on the principle in Pierburg's patent US8392060B2 report a fault by grounding the line for a coded duration, so a line that never comes back up looks the same as a pump stuck in its error state, and a real pump defect may stand behind the code. MACS stresses that electric water pumps work with a PWM input plus a feedback signal, so both should be scoped side by side. No manufacturer documents P2CA2 publicly; CARB requires the circuit check. P2CA1 is the high case.
Possible causes
- Feedback wire chafed against body or engine ground high
- Pump electronics holding the line low because of an internal fault medium
- Moisture or corrosion bridging pins in the pump connector medium
Symptoms
- MIL on
- Engine power limited when charge air temperature rises
- Code may appear together with pump speed or performance codes
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2CA2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.