P2CA1
Charge Air Cooler Coolant Pump Sense Circuit High
Some electric pumps in a water-cooled charge air cooler loop report back to the engine computer on a dedicated sense or feedback wire, kept apart from the line commanding them. P2CA1 means the level on that return wire stays above its plausible band. Usual reasons are a chafed wire touching a battery feed, a break in the line where the controller input is pulled up internally, or pump electronics that no longer switch the line at all. The title carries no pump letter. No manufacturer documents P2CA1 publicly. Pierburg's patent US8392060B2 explains that such pumps announce faults by tying a line to ground for coded periods, so a line that never drops hides every message. CARB requires circuit checks on emission-related inputs. Unable to confirm the pump, the controller may cut boost.
Possible causes
- Feedback wire chafed through and touching a battery or ignition feed high
- Broken feedback wire or backed-out pin, input floats to its high level medium
- Pump electronics no longer pulling the feedback line down medium
- Damaged input stage in the engine control module low
Symptoms
- MIL on
- Reduced power or boost under load, especially in hot weather
- Pump fault messages from the pump no longer reach the controller
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2CA1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.