OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C9A

Throttle Actuator B Control Exceeded Learning Limit

Throttle B exists only on engines with two electronically driven throttle bodies, usually one per cylinder bank on large V engines. P2C9A means a learned value of that second throttle – its closed-stop reference or the airflow correction stored for it – has reached the edge of the allowed range. Since both throttles must deliver matching air, a large learned offset on one side alone hints at deposits, a sticking plate or a replaced unit on that side. No manufacturer documents P2C9A. GM's 2023 tables handle the bank 2 throttle sensor with separate in-house codes (P30E5/P30E6) for the same stop-learn limit, judged within one trip. Expect rough or uneven idle, limited power if the module restricts the throttle, and possibly companion codes such as P218A (idle position of throttle B not learned).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 9A

Possible causes

  • Carbon deposits in throttle body B only high
  • Throttle body B replaced or cleaned without relearn medium
  • Throttle plate B sticking or its return spring weak medium
  • Position sensor of throttle B drifting low

Symptoms

  • Engine warning lamp
  • Uneven or hunting idle
  • Reduced power if the throttle is restricted

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2C9A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication