P2C99
Throttle Actuator A Control Exceeded Learning Limit
An electronic throttle relies on learned values: the closed-stop position of its sensors and, in many systems, a correction that widens the commanded opening as carbon narrows the bore. P2C99 says a learned value for throttle A has run into its permitted limit, so the module can no longer compensate. No manufacturer publishes P2C99. GM shows both ideas elsewhere: its 2023 tables (23OBDG07) fail the lower-stop learn of throttle sensor bank 1 with in-house codes P30E3/P30E4 within one trip, and GM patents cap the learned throttle area correction and report how near it is to that cap as a coking value. Heavy deposits, a worn or replaced throttle body without relearn, or drifting sensors are typical. Idle may be unstable and power reduced. P2176 is the related idle-position code.
Possible causes
- Heavy carbon deposits in the throttle bore needing more correction than allowed high
- Throttle body cleaned or replaced without resetting and relearning the adaptation medium
- Worn throttle shaft, plate or end stop shifting the closed position medium
- Throttle position sensor drifting low
Symptoms
- Engine warning lamp, possibly an electronic throttle warning
- Idle speed too high, too low or hunting
- Reduced power in a throttle emergency mode
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2C99
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.