OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C95

Hybrid/EV Battery Contactor Control Supply Circuit High

P2C95 is the upper-limit counterpart of P2C94: the voltage on the feed for the contactor coil drivers exceeds what the battery controller accepts. An excessive supply is less common than a weak one, but it heats the coils and stresses the driver transistors, and it can mean the measurement is wrong, for instance when the sense line touches a higher potential or the feed regulator inside the controller has failed. LG Energy Solution patent US12007445B2 shows that controllers measure this supply before each contactor closes; an upper limit is the logical extension, although the patent itself deals with undervoltage. No manufacturer documents P2C95 publicly. Depending on strategy the controller may refuse to close contactors or open them, so loss of ready mode is possible. CARB requires monitoring of hybrid components.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 95

Possible causes

  • Supply or sense line shorted to a higher voltage medium
  • Supply regulator or measurement in the battery controller faulty medium
  • 12 V system overvoltage from a faulty DC/DC converter or jump start low

Symptoms

  • Hybrid or EV system warning
  • Vehicle may not become ready or may shut down HV

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2C95

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication