OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C94

Hybrid/EV Battery Contactor Control Supply Circuit Low

P2C94 says the supply feeding the contactor drivers lies below its lower limit. Ford is the maker that documents it: special service messages 51513 and 51783 (2023) describe 2021–2023 Escape, Corsair, Aviator, Mustang Mach-E, F-150 and Transit plug-in models whose AC charging at level 1 or 2 stops with the MIL on and P2C94 logged in the SOBDM, the on-board charger module. As a stopgap the charge handle is unplugged and reconnected; a new SOBDM does not help. TSB 23-2399, extended by 24-2027 to the 2023 E-Transit, blames SOBDM software and cures it by reprogramming. Ford does not say which supply it measures. On other vehicles a genuinely low feed, as described in patent US12007445B2, can stop contactors closing fully. Compare P2C95 for the high side.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 94

Possible causes

  • On-board charger (SOBDM) software, Ford TSB 23-2399/24-2027 high
  • Supply feed pulled down by a weak 12 V battery or poor ground medium
  • Partial short or high resistance in the supply wiring low

Symptoms

  • AC charging stops while plugged in, MIL on
  • Charging resumes after unplugging and reconnecting
  • Vehicle may not become ready to drive

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2C94

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication