P2C8D
DC/DC Converter Temperature Sensor D Circuit Range/Performance
P2C8D is the plausibility test of DC/DC converter temperature sensor D: the voltage is electrically valid, but the temperature it implies does not match what the controller expects. Typical cross-checks compare the sensor with its neighbours after a long rest or look for a value that hardly changes while the converter works hard. FCA applies the code to its eTorque Ram 1500 pickup of model year 2021 (3.6 L V6), next to P0C39, P0C3E and P0E59 for the other converter sensors. Bulletin 08-037-21 flashes new Hybrid Control Processor software for trucks built up to 5 January 2021, and with it P2C8D becomes a one-trip fault, so the MIL lights after the first failed drive. FCA does not publish its limits. CARB demands rationality checks for hybrid component temperature sensors.
Possible causes
- Hybrid control software level (FCA HCP update per 08-037-21) medium
- Sensor D drifting and disagreeing with the other converter sensors medium
- Uneven cooling of the converter, e.g. low coolant or air in the circuit low
Symptoms
- MIL on, with newer FCA software after one faulty drive
- Reduced eTorque assist or start-stop availability
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2C8D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.