P2C8B
Hybrid/EV Battery Interface Control Module B Performance
P2C8B is the performance fault for the second battery interface control module, B. In GM's Ultium bulletins it never appears alone: PIP6021 applies only if P2C8B is stored together with P2C8A and the module communication codes U3577 to U35AF, and the 2025-26 versions of PIP6081 extend it through U3584 and add U2BAA-U2BB1. That pattern, many modules failing at once, points to a common cause in the BECM software or the module supply rather than to board B itself, so GM tells dealers not to replace hardware but to reprogram, reset and recheck after 10 minutes in Ready. A lone, repeatable P2C8B is different and suggests module B or its harness. CARB asks for battery faults to be pinpointed to the smallest replaceable unit, which is why A and B are separate.
Possible causes
- BECM software anomaly affecting several monitoring modules at once high
- Weak 12 V battery causing a brownout of the monitoring modules medium
- Connector or harness fault at interface module B low
- Interface module B itself defective low
Symptoms
- MIL or high-voltage service message
- Discharged 12 V battery
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2C8B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.