OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C87

Hybrid/EV Battery Voltage External Isolation Warning

P2C87 is the warning stage for weakening insulation outside the battery, on the vehicle-side high-voltage network. Many systems use two limits; Volkswagen's ID.4, for example, shows a yellow lamp below 510 kOhm and a red one below 90 kOhm. Mercedes-Benz stores P2C8700 for an insulation warning on the vehicle side, listed in its 2024 extended warranty for plug-in hybrids with a corroding high-voltage A/C compressor and in a 2025 bulletin on a moist PTC heater. Volvo logs P2C871A in the BECM of the EX30: if it appears together with P128300 in VCU1 and the car will not engage a gear or reports reduced power, Technical Journal 37771 has the combined charger and DC/DC module replaced. If the fault grows, P2C85 follows.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 87

Possible causes

  • Moisture or corrosion in an external HV component (compressor, heater, charger) high
  • Insulation fault inside the on-board charger or DC/DC converter medium
  • Dirty or wet high-voltage connector medium

Symptoms

  • Yellow high-voltage or battery warning
  • Reduced power or no gear engagement on some models
  • Intermittent, often after rain or washing

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2C87

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication