P2C85
Hybrid/EV Battery Voltage External Isolation Fault
P2C85 means the isolation monitor has found a fault-level loss of insulation on the vehicle side of the battery, in cables or components connected through the contactors. Mercedes-Benz uses the code in the battery management system with the text vehicle-side insulation fault. A 2024 warranty notice for C 350e, GLC 350e, GLE 550e and S 550e/560e plug-in hybrids lists it for a corroding high-voltage A/C compressor winding; the car could not be restarted once switched off. A 2025 bulletin for the 295, 296 and 297 model series traces it to moisture in a high-voltage PTC heater without a diaphragm. External versus internal follows from where the resistance is measured, as a Magna patent separates battery and component insulation. P2C87 is the earlier warning stage, P0AA6 the system fault.
Possible causes
- Insulation breakdown in the high-voltage A/C compressor high
- Moisture in the high-voltage PTC heater or its connector medium
- Chafed or crushed high-voltage cable touching the body medium
- Coolant or water inside inverter, motor or charger low
Symptoms
- Red high-voltage or battery warning, do not restart message
- Vehicle cannot be restarted after switching off
- Electric heater or A/C not working
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2C85
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.