P2C82
AIR System Pump Supply Voltage Circuit Bank 1
P2C82 points to a fault in the supply voltage circuit of the bank 1 secondary air pump. Conventional pumps are switched on by a relay; pumps with their own electronics, like the brushless design in an FCA patent, receive a feed and can judge whether the voltage arriving there is plausible. No manufacturer documents P2C82 publicly; CARB demands that all electrical secondary air components be checked for circuit faults. Common causes are the high-current fuse, a corroded or loose connector, a damaged feed or ground wire and a relay with burnt contacts; heavy voltage dips during cranking may contribute. Without a proper feed the pump stays off, cold-start emissions rise and the secondary air readiness test fails. P0418 covers the relay control circuit, P2445 a pump that does not deliver.
Possible causes
- Blown high-current fuse for the pump high
- Relay with burnt or sticking contacts medium
- Corroded or loose pump connector medium
- Damaged feed or ground wire to the pump medium
Symptoms
- Check engine light
- No pump noise for the first minute after a cold start
- Secondary air readiness incomplete
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2C82
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.