OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C7F

Turbocharger Turbine Inlet Valve Position Sensor Exceeded Learning Limit

P2C7F means the turbine inlet valve's position sensor has delivered an end-stop value outside the window the module accepts during its learning routine. Electric turbo valves are periodically driven against their stops and the reading there is stored as a reference; Ford's patent US9243553B2 explains for wastegates why this reference has to be refreshed, since hot linkages change length. No manufacturer documents P2C7F publicly. Comparable GM codes set when the learned closed position of wastegate A is above 85 % (P2B93, 2.7-litre L3B) or when the learned stops of the 3.0-litre diesel's exhaust flap leave their windows (P2B97). Typical causes are deposits keeping the valve off its seat, a bent linkage, a shifted sensor magnet or a new actuator not yet adapted. Without a valid reference boost control may be limited.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 7F

Possible causes

  • Carbon deposits preventing the valve from reaching its end stop high
  • Replaced actuator or turbocharger without a completed learn procedure medium
  • Bent or worn linkage shifting the end positions medium
  • Position sensor or its magnet shifted on the shaft low

Symptoms

  • Check engine light
  • Inconsistent boost during changeover between turbine paths
  • Reduced power in some engines

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C7F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication