P2C78
Active Grille Air Shutter Module D Over Temperature
P2C78 is the over-temperature report of the actuator module for a fourth grille shutter D: its driver electronics have exceeded their thermal limit and the output stage has been switched off to protect it. No vehicle with a shutter D is documented, so the logic is borrowed from Ford's smart shutter actuators, which use P05C0/P05C1 for shutters A and B and set them when the controller chip reports more than 140 °C for 10 s (2023 diesel) or 30 s (2024 petrol). Typical triggers are a motor stalled against ice or a damaged linkage, a partly shorted coil, or heat soak near the radiator combined with constant repositioning. Because the protection releases once the chip cools, the code may come and go. Compared with P2C76 and P2C77 it says less about the flap than about the actuator's own health.
Possible causes
- Motor stalled against ice or a damaged linkage high
- Partly shorted actuator coil medium
- Heat soak near the radiator combined with constant repositioning low
Symptoms
- Intermittent engine warning lamp
- Shutter D stops moving for a while
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C78
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.