OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C77

Active Grille Air Shutter D Control Circuit Range/Performance

P2C77 flags the drive circuit of a fourth grille shutter D as implausible: the actuator does not respond to its command in the expected way, or the signal it returns lies outside the permitted window. No manufacturer publishes a shutter D, so the code is reserved for designs with four separately powered flaps. Comparable faults on other flaps show where to look. VW's 2015–16 Jetta (1.8 T and 2.0 TDI) set P05A3 for shutter A, often together with P05A0, because the software inside the grille motor was faulty; an updated motor cured it. Hyundai's 2026 Palisade sets P2C74 for shutter C when water corrodes the bumper connectors. So wiring, connectors and the actuator itself come before any module. Driving is normally unaffected beyond the warning lamp; the flap simply stays where it stopped.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 77

Possible causes

  • Corroded connector or damaged wiring to the actuator of shutter D high
  • Actuator of shutter D faulty, including faulty internal software medium
  • Stiff or partly blocked flap slowing the actuator response low

Symptoms

  • Engine warning lamp
  • Shutter D no longer follows commands

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C77

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication