OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C75

Active Grille Air Shutter Module C Over Temperature

Smart grille shutter actuators carry their own driver chip and protect it by temperature. P2C75 is that self-protection for shutter C: the module reports its electronics as overheated and stops driving the motor. No manufacturer documents P2C75; the closest published logic is Ford's for shutters A and B (P05C0, P05C1): a chip junction temperature above 140 °C, confirmed after 10 s in the 2023 diesel summary and after 30 s in the 2024 petrol summary, with no further entry conditions. Heat builds when the motor keeps pulling against a frozen, jammed or bent flap, or when its winding is partly shorted; an internal fault is also possible. After cooling the flap often works again, which makes the fault look sporadic. Unlike P2C73 and P2C74, the verdict comes from the actuator's own electronics.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 75

Possible causes

  • Flap frozen, jammed or bent so the motor works against a stop high
  • Partly shorted motor winding drawing excess current medium
  • Internal fault of the actuator electronics medium

Symptoms

  • Engine warning lamp, often intermittent
  • Shutter C stops moving until the module has cooled down

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C75

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication