OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C74

Active Grille Air Shutter C Control Circuit Range/Performance

P2C74 judges the drive of grille shutter C: the command to the actuator or the feedback it returns does not fit the expected range, so the flap may move sluggishly, erratically or not at all. Hyundai is the documented user. In its 2026 Palisade and Palisade Hybrid (built May to December 2025) the lower air flap system has a left and a right actuator plus two flap sensors, and campaign 26-01-026H (revised as 26-01-026H-1 in August 2026) lists P2C74 with P05FE, P05AE and U0285. The cause there was water reaching the bumper connectors and corroding pins; the driver sees an air flap system message and the engine lamp, sometimes even a low oil warning. Repair means cleaning or replacing connectors, actuator, sensor or bumper harness. Unlike P2C73 (flap stuck open), this code points at the electrical drive path.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 74

Possible causes

  • Water ingress and corroded pins at the bumper connectors of the flap actuator or sensor high
  • Chafed or broken front bumper harness medium
  • Actuator of shutter C faulty or responding too slowly medium
  • Flap position sensor of the lower air flap faulty low

Symptoms

  • Engine warning lamp and an active air flap warning message
  • Flap does not move or moves jerkily
  • Possibly an unrelated low engine oil message at the same time

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C74

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication