P2C6E
Drive Motor A Phase Y Current High
P2C6E reports that too much current flows in the Y phase of drive motor A, which sits in the machine's second winding set. No manufacturer documents P2C6E publicly. A Hyundai bulletin shows what usually lies behind a phase overcurrent: on the 2017 Ioniq Hybrid, coolant leaking inside the traction motor set the high codes of phases U, V and W (P0A5F, P0A62, P0A65), often with the isolation fault P0AA6. Dealers ran an insulation breakdown test and replaced the motor if it failed, and drivers noticed weak acceleration and no air conditioning. The same applies to Y: moisture, coolant or damaged insulation lets current bypass the intended path. A shorted inverter switch or a sensor reading too high are the other suspects. P2C6D is the low side, P2C6B and P2C71 are X and Z.
Possible causes
- Coolant or moisture inside the motor degrading winding insulation medium
- Short between phase Y and another phase or the stator core medium
- Shorted power switch in the Y leg of the inverter medium
- Phase Y current sensor reading too high low
Symptoms
- Hybrid warning and MIL, often with an isolation fault code
- Weak acceleration or electric drive switched off
- Electric air conditioning compressor disabled
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2C6E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.