P2C6C
Drive Motor A Phase Y Current
P2C6C is the umbrella code for the current in phase Y of drive motor A, the middle phase of the second X/Y/Z winding set. No manufacturer documents it publicly. Ford's 2019 hybrid summary explains what such phase current codes collect: the inverter is watched for overcurrent, current sensor faults and current regulation faults, and the result is stored per phase. For Y that means the measured current does not follow the command, or the reading cannot be trusted, without being clearly low (P2C6D) or high (P2C6E). A failed sensor circuit has its own code, P2E1F. CARB leaves the drive motor monitoring plan to each manufacturer, so thresholds differ. In practice look at the Y phase lead, its terminals and the inverter, and expect a warning and reduced or no electric drive.
Possible causes
- Inverter cannot regulate the phase Y current to its command (control or gate drive fault) high
- Loose, corroded or overheated phase Y terminal at inverter or motor medium
- Phase Y current reading implausible against the other two phases medium
- Partial winding fault in phase Y of the motor low
Symptoms
- Hybrid or drive warning, MIL on
- Reduced electric torque or jerky drive
- Vehicle not ready to drive in severe cases
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2C6C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.