P2C68
Hybrid/EV Electronics Coolant Pump A Stuck/Stalled
P2C68 means the electronics coolant pump A has power and a command, yet its rotor does not turn or stops. Brushless pumps notice this themselves from a failed start attempt or high current with no rotation and report it to the controller. No manufacturer publicly documents P2C68. Ford's 2024 summary shows the matching fault type 71, actuator stuck, for engine coolant pump A (P2B9C), and a GM patent detects electric coolant pump faults by comparing measured with expected current. Seized bearings, sludge or debris, frozen coolant and burnt windings are the usual causes. Without flow, inverter and charger heat up quickly, so the vehicle limits power or stops charging. Audi's e-tron bulletin shows pump circuit faults (P0CE9) together with low coolant warnings.
Possible causes
- Seized bearing or impeller in pump A high
- Foreign matter or sludge blocking the impeller medium
- Coolant frozen due to weak antifreeze low
- Burnt winding or failed pump electronics medium
Symptoms
- Drive system warning, check engine light
- Strongly reduced power or charging interrupted
- No pump noise when the pump is activated with a scan tool
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2C68
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.