P2C67
Hybrid/EV Electronics Coolant Pump A Overspeed
With P2C67 the electronics coolant pump A runs faster than commanded. A centrifugal pump speeds up as soon as it loses load, so air in the loop is the leading suspect, followed by a loose impeller or a faulty speed signal. Mercedes logs the related dry-run code P2B2A7A on the GLE/GLS 167 with M177 V8 and 48 V system: air in the low-temperature loop sends the 15 W pump into an emergency dry-run mode, and the cluster shows a yellow coolant message. A Pierburg patent detects dry running by letting the motor coast after a defined energy pulse and counting rotor turns. No manufacturer documents P2C67 itself. Ford's 2024 summary treats overspeed/dry run (B1) as its own pump fault type. Underspeed is P2C66, dry run P2B2A.
Possible causes
- Air in the electronics loop after service or from a leak high
- Low coolant level in the low-temperature reservoir medium
- Impeller slipping on the shaft or broken low
- Implausible speed feedback from the pump electronics low
Symptoms
- Coolant or drive system warning in the cluster
- Churning or gurgling noise from the pump
- Reduced power when electronics temperatures climb
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C67
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.