OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C5F

Cylinder 7 Fuel Injector B Offset Learning At Max Limit

P2C5F, again a V8 code, flags injector B of cylinder 7 whose learned offset is pinned at its maximum. A point often missed is the learn history: when an injector is replaced or software changes, old adaptation values can sit at the limit until they are cleared. Volvo, for example, insists on resetting the injector adaptations with the engine running after its software update for the related four-cylinder codes. If the code returns after a reset and a full learn, the valve really underdelivers: varnish in the nozzle, a slow pintle or a poor connection. Comparing with the A-injector partner P02D9 shows whether only the B side is affected. No manufacturer publishes P2C5F; CARB 1968.2 (e)(6.2.2) defines the requirement.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 5F

Possible causes

  • Varnish or deposits in injector B of cylinder 7, slow opening high
  • Corroded or loose connector, chafed wire or voltage drop at this injector medium
  • Old adaptation values left at the limit after a repair or software change medium
  • Air leak at the intake runner of cylinder 7 (only where the learn uses exhaust oxygen) low

Symptoms

  • Check engine light
  • Often nothing else noticeable
  • Possibly uneven idle or lean misfire on cylinder 7

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C5F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication