OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C5E

Cylinder 7 Fuel Injector B Offset Learning At Min Limit

P2C5E belongs to cylinder 7 and therefore to engines with at least seven cylinders, in practice V8s. It is stored when the learned offset of injector B has been driven to its floor: the valve gives more fuel than the model predicts even at the shortest permitted command. On Ford-numbered V8s cylinder 7 is on bank 2, on GM-numbered ones on bank 1, so a rich fuel trim for system B on the matching bank (P2BF1 or P2BF3) supports the finding. Leaking seats, a wrongly rated replacement valve or excess rail pressure are the usual suspects. No manufacturer documents P2C5E publicly; Ford's 2020 to 2025 OBD summaries for its dual-injection V8 do not list it either. It falls under CARB 1968.2 (e)(6.2.2).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 5E

Possible causes

  • Injector B of cylinder 7 leaking at the seat and adding fuel after closing high
  • Replacement injector of a different flow rating or not matched to the engine software medium
  • Old learned values not reset after injector or software work medium
  • Supply pressure on this injector set higher than the model assumes (regulator) low

Symptoms

  • Check engine light
  • Often nothing else noticeable
  • Long hot start or rough first seconds, possibly misfire on cylinder 7
  • Possibly fuel smell or higher consumption

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C5E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication