P2C5B
Cylinder 5 Fuel Injector B Offset Learning At Max Limit
P2C5B is the Max limit for injector B on cylinder 5, found on five-, six- and eight-cylinder engines. With two injection systems, one set may stay idle in parts of the map, and fuel left in a resting nozzle can varnish and slow the valve; the learned offset then climbs until it hits the ceiling. Ford builds such dual-injection V6 and V8 engines, yet its public OBD summaries for 2020 to 2025 list no offset-limit codes for injector B, and no other maker publishes P2C5B. The A-injector partner is P02D5. Before replacing parts, rule out a circuit fault on the same valve (P21D3) and reset the adaptations after any repair. CARB 1968.2 (e)(6.2.2) supplies the legal basis.
Possible causes
- Varnish or deposits in injector B of cylinder 5, slow opening high
- Corroded or loose connector, chafed wire or voltage drop at this injector medium
- Old adaptation values left at the limit after a repair or software change medium
- Air leak at the intake runner of cylinder 5 (only where the learn uses exhaust oxygen) low
Symptoms
- Check engine light
- Often nothing else noticeable
- Possibly uneven idle or lean misfire on cylinder 5
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C5B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.