P2C59
Cylinder 4 Fuel Injector B Offset Learning At Max Limit
P2C59 tells that injector B of cylinder 4 has reached the maximum learned offset, so its delivery falls short even with the longest allowed correction. Volvo's Technical Journal 36016 includes it among four codes, one per cylinder from 1 to 4 and all at the Max limit, on 2022 model-year cars; the first step there is software, not parts. Outside such a bulletin, a swap test helps: move injector B of cylinder 4 to another cylinder, reset the adaptations and let the learn run again. If the Max code follows the injector, the valve is at fault; if it stays with cylinder 4, wiring, connector or the intake side of that cylinder are next. CARB 1968.2 (e)(6.2.2) treats an adaptation out of authority as a malfunction.
Possible causes
- Engine software (Volvo TJ 36016: update, then reset injector adaptations in VIDA) high
- Varnish or deposits in injector B of cylinder 4, slow opening medium
- Corroded or loose connector, chafed wire or voltage drop at this injector medium
- Air leak at the intake runner of cylinder 4 (only where the learn uses exhaust oxygen) low
Symptoms
- Check engine light
- Usually no change in how the car drives
- Possibly uneven idle or lean misfire on cylinder 4
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C59
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.