OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C57

Cylinder 3 Fuel Injector B Offset Learning At Max Limit

P2C57 is the upper-limit counterpart for injector B on cylinder 3. A Ford patent on engines with two injector types explains why each injector needs its own learned offset: it is the time needed to overcome the inertia of the pintle and of the driver circuit, and it shifts with battery voltage and temperature. A valve that opens late, a corroded connector that drops voltage or deposits in the nozzle therefore push the correction toward its maximum. Volvo is the one maker with a public bulletin for this code (TJ 36016, model year 2022), where it usually appears without symptoms and is cured by a software update plus an adaptation reset in VIDA. CARB 1968.2 (e)(6.2.2) is the regulatory basis.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 57

Possible causes

  • Engine software (Volvo TJ 36016: update, then reset injector adaptations in VIDA) high
  • Varnish or deposits in injector B of cylinder 3, slow opening medium
  • Corroded or loose connector, chafed wire or voltage drop at this injector medium
  • Air leak at the intake runner of cylinder 3 (only where the learn uses exhaust oxygen) low

Symptoms

  • Check engine light
  • Usually no change in how the car drives
  • Possibly uneven idle or lean misfire on cylinder 3

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C57

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication