P2C55
Cylinder 2 Fuel Injector B Offset Learning At Max Limit
P2C55 reports that injector B of cylinder 2 needs the maximum offset the engine control allows: even with the longest permitted extension of its pulse it underdelivers. Volvo lists it in Technical Journal 36016 for 2022 model-year cars with engine variants L1 and 06. Version 4.0 of August 2021 still asked for model-specific special software, version 5.0 from September replaced that with a regular software release available from week 37 of 2021, again followed by an adaptation reset in VIDA. Cars treated before week 34 that showed the codes again had to be updated once more. Outside Volvo, a varnished or partly blocked injector, a high-resistance connector or, where the learn uses exhaust oxygen, a leak at the intake runner of cylinder 2 can drive the value up.
Possible causes
- Engine software (Volvo TJ 36016: update, then reset injector adaptations in VIDA) high
- Varnish or deposits in injector B of cylinder 2, slow opening medium
- Corroded or loose connector, chafed wire or voltage drop at this injector medium
- Air leak at the intake runner of cylinder 2 (only where the learn uses exhaust oxygen) low
Symptoms
- Check engine light
- Usually no change in how the car drives
- Possibly uneven idle or lean misfire on cylinder 2
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C55
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.