OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C53

Cylinder 1 Fuel Injector B Offset Learning At Max Limit

P2C53 is the opposite end of the injector B offset learn on cylinder 1: the engine control has lengthened the command as far as it may, and the cylinder still gets less fuel than requested. Ford patents describe the offset as the time the pintle and the driver circuit need before fuel moves, so a sticky or varnished valve or a weak supply raises it. Volvo documents the code: Technical Journal 36016 (2021) lists P2C53 together with P2C55, P2C57 and P2C59 as permanent ECM faults on 2022 model-year cars of types 224 to 246 with engine variants L1 and 06, usually without any drivability complaint. The remedy was new engine software followed by a reset of the injector adaptations in VIDA with the engine running, strictly in that order.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 53

Possible causes

  • Engine software (Volvo TJ 36016: update, then reset injector adaptations in VIDA) high
  • Varnish or deposits in injector B of cylinder 1, slow opening medium
  • Corroded or loose connector, chafed wire or voltage drop at this injector medium
  • Air leak at the intake runner of cylinder 1 (only where the learn uses exhaust oxygen) low

Symptoms

  • Check engine light
  • Usually no change in how the car drives
  • Possibly uneven idle or lean misfire on cylinder 1

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C53

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication