OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C50

Clutch Pedal Position Sensor A/Clutch Actuator Position Sensor Correlation

P2C50 compares two views of the same clutch: what the pedal sensor A says the driver is doing and what the sensor at the release side says the clutch is actually doing. In a hydraulic system both move together, so a lasting gap points to a fault in one sensor or in the hydraulics between them. Ford's OBD documents for gasoline engines (model years 2020–2023 and 2024) assign it to the in-range rationality check of the clutch actuation position sensor, reported as P2C50_00, monitored continuously with detection in under a second. Schaeffler's work on electronic clutch management shows why such a comparison needs tolerance: warming brake fluid alone shifted the measured position by about 6 mm. Circuit faults of each sensor have their own codes (P08A7 ff., P2C4A ff.). Start-stop is typically disabled.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 50

Possible causes

  • Air or leak in the clutch hydraulics between pedal and slave cylinder high
  • Release-side position sensor or slave cylinder faulty medium
  • Clutch pedal sensor A drifted or misadjusted medium
  • Positions not relearned after clutch or sensor work low

Symptoms

  • Stop-start unavailable
  • Warning lamp or message
  • Clutch pedal feel may be soft or inconsistent

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2C50

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication