OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C48

Coolant Pump C Control Circuit Performance/Stuck Off

P2C48 is a performance check on coolant pump C: the pump is driven, but what it draws or delivers does not match the request. GM uses it in its diesel tables, where pump C is the electric pump of the low-temperature loop: 20OBDG04 estimates the phase current expected at the actual pump speed and flags an error above 4 A for more than 5 s (5 failures in 8 samples), 25OBDG04A above 1 A with the pump over 2,800 rpm (10 of 12); both type B, two trips. In 19OBDG07 GM assigns P2C48 to the pump for the charge air cooler, using a speed-dependent current window. Bulletin 21-NA-265 (Silverado/Sierra 2500/3500 HD 2020–2022, L5P) links P2C48 and a coolant leak to the fuel cooler hose rubbing on the front drive shaft. Underspeed is P2BA0.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 48

Possible causes

  • Low coolant or air in the low-temperature loop, e.g. from a chafed hose (GM 21-NA-265) high
  • Worn, sluggish or partly blocked pump medium
  • Fault in the pump's integrated motor electronics medium
  • Weak supply from the powertrain relay or poor ground low

Symptoms

  • Check engine light after two trips
  • Coolant leak under the vehicle
  • Higher intake air or fuel temperature, possibly reduced power

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C48

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication