OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C44

Battery Isolation/Voltage Stabilization Control Circuit Performance

P2C44 means the isolation or voltage stabilization stage is wired and commanded, yet its behaviour does not match what the module expects. Ford is the one maker with published cases: 2021–2022 F-150 trucks with the 3.5 L PowerBoost hybrid and 10R80 MHT gearbox carry a second 12 V battery that an auxiliary battery isolator separates from the main battery. Two special service messages (SSM 50843, 50976) have the technician check ground circuit GD132 including G102, C146 and C1989C and test the auxiliary battery before swapping the isolator; bulletin 23-2031 then combined new PCM software with a new isolator (ML3Z-14526-B, up to 0.7 h). Ford shows the wrench indicator rather than the emissions lamp, sometimes together with U061E. Unlike P2C45/P2C46 the wiring voltage itself is not out of range.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 44

Possible causes

  • Auxiliary battery isolator faulty (Ford replaces it per bulletin 23-2031) high
  • Poor ground in the isolator circuit (Ford GD132, G102, C146, C1989C) high
  • Outdated PCM software medium
  • Weak or failing auxiliary 12 V battery medium

Symptoms

  • Wrench (powertrain malfunction) indicator on
  • U061E may be stored alongside
  • Electrical glitches during engine pull-up

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C44

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication