P2C42
Fan 4 Performance/Stuck Off
P2C42 reports that the fourth fan output does not deliver what is asked of it: the fan stays still or reaches far too little speed while its control line shows no electrical fault (those would be P2C3E to P2C40). No manufacturer publicly documents P2C42. Which part is fan 4 varies: a further radiator fan stage, an auxiliary fan for a charge air or oil cooler, or an engine compartment blower like the pair Porsche fits to the rear-engined 911, whose failure brings a warning to avoid full engine load. Mechanical blocking by dirt, as Audi found on the e-tron GT, worn bearings and a failed fan electronics module are the usual causes. Clean and spin the fan by hand before replacing parts. Fan 3 has P2C41, fan 2 P2B31.
Possible causes
- Fan jammed by debris or a damaged shroud high
- Worn bearings or corroded motor medium
- Integrated fan electronics or fan module failed medium
Symptoms
- Temperature warning or reduced power under high load
- Fan 4 does not turn when activated with a scan tool
- Grinding noise before the fan stops
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C42
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.